Galvanised RHS Drain / DuraGal Fence Posts
| GAL DRAIN HOLLOW SECTIONS |
Does your council require a galvanised steel hollow section for drainage to the road? Treco Steel’s Gal Drain may be the answer! Treco Steel uses 350 Grade Steel for its rectangular and square hollow sections which are cut and hot-dip galvanised in accordance with the Australian Standard for Hot-dip Galvanised (zinc) coatings on fabricated ferrous articles (AS/NZS 4680).
Treco Steel stocks the following hot dipped galvanised hollow sections in 4, 6 and 8 metre lengths.
100 x 100 x 4.0 mm Galvanised Square Hollow Section (SHS)
150 x 100 x 4.0 mm Galvanised Rectangular Hollow Section (RHS)
200 x 100 x 4.0 mm Galvanised Rectangular Hollow Section (RHS)
| DURAGAL FENCE POSTS |
Treco Steel stocks the following DuraGal hollow sections for fence posts:
50 x 50 x 1.6mm
1500mm, 1800mm, 2100mm, 2400mm, 2700mm, 3000mm, 8000mm.
Treco Steel is also able to supply other DuraGal sizes in hollow sections, channels, angles and flats. However, these products need to be ordered by the length and, if necessary, cut to length.
lintels / galvanised ribbed lintels and galvanised arch bars / Rendabar and concrete lintels /
Tyvek HomeWrap / Tyvek FlexWrap / Tyvek Flashing Tape / Tyvek Contractor Tape / Shelf Angle /
Galintel MultiRib T Bars and galvanised T lintels / Cavi T Bar and J Bar /
galvanised retaining wall posts / galvanised drain and DuraGal fence posts /