|
|
ARCH BARS |
|
Treco Steel carries a range of conventional galvanised angles and flats. Stock lengths are kept for the following sizes:
150 x 90 x 10 mm Gal Angles: 1800mm, 2100mm, 2400mm, 2700mm, 3000mm, 3300mm, 3600mm, 4000mm, 4200mm, 4500mm.
100 x 75 x 10 mm Gal Angles: 900mm, 1200mm, 1500mm, 1800mm, 2100mm, 2400mm, 2700mm, 3000mm.
75 x 10 mm Gal Flats: 600mm, 700mm, 800mm, 900mm, 1000mm, 1100mm, 1200mm, 1300mm, 1400mm, 1500mm, 1600mm, 1700mm, 1800mm.
Long lengths for cut to size are also kept for a range of galvanised angles and flats.
Galvanised Angles
- 100mm x 75mm x 10mm - 100mm x 100mm x 10mm
- 150mm x 90mm x 10mm - 150mm x 100mm x 10mm - 150mm x 100mm x 12mm
Galvanised Flats
- 75mm x 10mm
- 100mm x 10mm |
DURAGAL FENCING |
|
Treco Steel stocks the following DuraGal Hollow Sections:
50 x 50 x 1.6mm
2100mm, 2400mm, 6300mm, 7200mm.
Treco Steel is also able to supply other DuraGal sizes in hollow sections, channels, angles and flats.
However, these products need to be ordered by the length.
|
GAL DRAIN |
|
Treco Steel stocks the following hot dipped galvanised hollow sections in 4, 6 and 8 mtr lengths:
100 x 100 x 4.0 mm Gal SHS
150 x 100 x 4.0 mm Gal RHS
200 x 100 x 4.0 mm Gal RHS |
RETAINING WALL SECTION |
|
Galvanised End Sections - 100 x 50 Channel
900mm, 1200mm, 1500mm, 1800mm, 2100mm, 2400mm.
Galvanised H Sections - 100 UC
900mm, 1200mm, 1500mm, 1800mm, 2100mm, 2400mm. |
GALVANISED STEEL BOLLARDS |
|
Treco Steel carries a range of one metre tall hot dipped galvanised steel bollards in either pipe of square hollow section (SHS). Generally, sizes are 75mm, 90mm and 100mm pipe or SHS.
|
STRUCTURAL & MERCHANT STEEL SECTIONS |
|
Treco Steel supplies a range of structural and merchant steel sections.
Treco Steel is able to supply Universal Beams (UB’s), Universal Columns (UC’s), Parrallel Flange Channels (PFC’s),
Rolled Steel Joists (RSJ’s), Hollow Sections (RHS, SHS and Pipe), Angles, Flats, Rounds and Squares.
|
CUTTING & FABRICATION |
|
Cutting
Band Saw cutting of Universal Beams & Columns, RSJ’s & Channels, RHS & Pipe.
Cropper cutting of angles, flats, rounds and squares.
Fabrication
Welding: Stick and MIG
Drilling & Punching
Priming with Red Oxide Zinc Chromate
Hot Dipped Galvanising
|
|
